Parasound(파라사운드) 2.1채널 프리앰프 P6
상품분류 프리앰프 (Pre Amplifier)
제조사 Parasound(파라사운드)
총평점 -  [사용기 작성]
판매가 2,320,000원
적립금 0원
카드결제 [무이자할부안내] (위탁/중고제품은 카드결제 미적용)
배송비 5만원이상 무료
옵 션
주문수량



  • HT 바이패스, DAC 내장







  •  
    Features 

    New Features (Changes from the P 5)

    ·         ESS Sabre32 Reference DAC replaces the original Burr-Brown DAC

    ·         USB input is now capable of DSD & 384kHz/32-bit PCM (up from 96Khz/24-bit)

    ·         Burr Brown analog resistor ladder volume control

    ·         Dimmable front panel volume display

    ·         Upgraded USB receiver with "plug and play" operation with Windows 10

    ·         An additional optical input (2 total)

    ·         Ball bearing supported solid aluminum volume knob

    ·         Programable default turn on volume setting

    ·         Favorite volume memory with remote control button

    ·         Increased phono stage gain for lower output cartridges

    ·         Improved Left/Right channel separation and balance tracking

    ·         Sand blasted metal end caps replace plastic end caps on the P 5

    ·         Updated cosmetics with subtle gold highlights

    Preamp and DAC Features

    ·         ESS Sabre32 Reference DAC (ES9018K2M)

    ·         Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit

    ·         USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD

    ·         Coax and optical inputs accept PCM up to 192kHz/24-bit

    ·         Analog bass management with high & low pass crossovers

    ·         Home theater bypass input for surround sound integration

    ·         Front panel subwoofer level control

    ·         Dedicated high current headphone amplifier (TI TPA6120)

    ·         Phono input for MM, MC and MI with 100 Ω or 47k Ω load

    ·         Front panel Aux input with automatic +12 dB gain stage

    ·         5 pairs RCA line level Analog inputs

    ·         1 pair XLR balanced Analog input

    ·         Balanced XLR and RCA left and right preamp outputs

    ·         1 balanced XLR and 2 RCA subwoofer outputs

    ·         Bass & treble controls with relay bypass from remote or front panel

    ·         Rear panel IR input and IR loop output jacks

    ·         12 Volt trigger output

    ·         Back-lit remote control with discrete buttons

    ·         0.5w standby power consumption meets Energy Star & EU specs

     

            Specs

    • Frequency Response 
      10 Hz - 100 kHz, +0/-3 dB 
      20 Hz - 20 kHz, +0/-0.5 dB
    • Total Harmonic Distortion (THD) 
      < 0.01 %
    • Interchannel Crosstalk 
      > 70 dB at 20 kHz 
      > 78 dB at 1 kHz
    • Preamplifier Stage Input Sensitivity 
      300 mV in for 1 V 
      Total Gain: 10 dB 
      Max Output: 7.5V
    • S/N Ratio - Line Inputs 1- 5 
      > 108 dB (shorted, IHF A-weighted) 
      > 88 dB (shorted, unweighted)
    • S/N Ratio - DAC Inputs 
      > 108 dB (IHF A-weighted) 
      > 88 dB (unweighted)
    • S/N Ratio - Phono Input 
      MM > 80 dB (shorted, IHF A-weighted) 
      MM > 70 dB (shorted, unweighted) 
      MC > 67 dB (shorted, IHF A-weighted) 
      MC > 55 dB (shorted, unweighted)
    • Phono Stage Sensitivity / Input Impedance 
      MM: 38 dB / 47 k Ω 
      MC: 52 dB / 47 k Ω or 100 Ω
    • Input Impedance 
      Unbalanced: 24 k Ω 
      Balanced: 100 k Ω per leg
    • Preamplifier Output Impedance 
      Unbalanced: 100 Ω 
      Balanced: 470 Ω per leg
    • High & Low Pass Crossover Slope 
      12 dB per octave
    • Supported DAC Sampling Rates 
      USB: up to 384 kHz / 32-bit PCM 
      DSD Native: DSD 64, DSD 128, DSD 256 
      DSD over PCM (DoP) at 384 kHz 
      Coax/Optical: up to 192 kHz / 24-bit PCM
    • Digital to Analog Converter 
      ESS Sabre32 Reference ES9018K2M 
      384 kHz / 32-bit
    • USB 2.0 Controller 
      Savitech SA9227, 384 kHz / 32-bit
    • Headphone Amplifier 
      Texas Instruments TPA6120A 
      Output Impedance 10 ohms
    • XLR Pin Identification 
      1 = Ground (Shield) 
      2 = Positive 
      3 = Negative (Return)
    • Dimensions 
      Width: 17-1/4" (437 mm) 
      Depth: 15" (381 mm) 
      Depth, with cables 17" (432 mm) 
      Height, with feet: 4-1/8" (105 mm) 
      Height, without feet: 3-1/2" (89 mm), 2U
    • Net Weight 
      14 lb. (6.3 kg)
    • Shipping Weight 
      21 lb. (9.5 kg)
    • Power Requirement 
      Standby: 0.5 watts 
      Power On: 15 watts 
      100-250 VAC 50/60 Hz (automatic)10 Hz - 100 kHz, +0/-3 dB 
      20 Hz - 20 kHz, +0/-0.5 dB